Swish Native Hardwood - Spotted Gum Select - 14/2mm Australian Hardwood Flooring

Select is the entry point into the Swish Native Hardwood range: a 2mm hardwood wear layer on a 136mm board. On the swatch it is also the most saturated of the three Spotted Gum options — a deep caramel-orange golden brown with warm amber lights and clear contrast between the lighter and darker boards, though the overall grade sits at the calmer end rather than the full-feature end where Spotted Gum Natural lives. Remember that Natural, Neat and Select describe how much feature the timber carries, not what colour it is; all three come from the same species and the same warm palette.

Two things change when you move to Select, and only one of them is grade. Natural, Neat and Select are grades rather than colours — they describe how much knot, gum vein and board-to-board colour variation the floor carries, not what shade it is. Select sits at the calmer end alongside Neat rather than at the full-feature end where Natural sits. The second change is construction: Select is built as a 14/2mm board, with a 2mm hardwood wear layer, where both Natural and Neat carry 3mm. That makes Select the entry point into the range. The surface is the same genuine Australian hardwood, but a thinner wear layer can be resanded fewer times over the life of the floor, and we are not going to quote a number for that because it depends entirely on the installer and how much material each pass removes. In fairness, one note on the supplier's own published grade text for Select: it duplicates the wording used for Neat, so we have described the grade from the specification and the physical swatch rather than repeat a line we cannot stand behind.

In everyday use a 2mm Australian hardwood surface behaves exactly like a 3mm one. It takes the same cleaning, the same protective felts under furniture and the same care around water, and it looks identical underfoot. The difference appears only at the far end of the floor's life, when a thinner wear layer allows fewer full machine sandbacks than the 3mm boards used for Spotted Gum Neat and Spotted Gum Natural. For most Sydney homes that is a fair trade for genuine Australian hardwood in a warm, rich colour on a well-proportioned board.

Here is what you are actually buying. Swish Native Hardwood is an engineered board, not a solid one: a wear layer of Australian Spotted Gum bonded to a cross-laminated engineered core, which is why the specification is written as 14/2mm (2mm hardwood wear layer) rather than as a single figure. This board runs 136mm wide by 1900mm long with a micro-bevelled edge and a tongue and groove profile, packs cover 1.55 m² over six boards, and it can be glued down or floated over underlay. The engineered core is the reason it can be laid over concrete slabs and in apartments where a solid strip floor would be difficult, and it moves far less with seasonal humidity than solid hardwood of the same width. It is still timber, though, so it must be delivered and acclimatised in the room before installation — that step is not optional on engineered boards any more than it is on solid ones. Emissions are rated E1 at less than 5ppm, and the supplier product code for this board is SG136F142.

Eco Flooring Systems source the timber for this range from responsibly managed forests, and using Australian species means the hardwood underfoot has not been shipped across the world before it reaches your floor. Engineering the board also stretches that hardwood a long way, concentrating it in the layer you actually walk on. Remember that every board of a natural timber floor is different and that all timber shifts tone as it ages under light — Australian hardwoods in particular tend to deepen and warm over the first year or two. That is the character you are paying for rather than a flaw, but it does mean you should hold a physical sample in your own room rather than judging colour from a screen. Supply and install available across Sydney.

Specifications

• Range: Swish Native Hardwood by Eco Flooring Systems
• Colour / grade: Spotted Gum Select
• Type: Engineered timber floor with an Australian Spotted Gum wear layer
• Thickness: 14/2mm (2mm hardwood wear layer)
• Board width: 136mm
• Board length: 1900mm
• Veneer grade: Cleaner, low-feature grade
• Edge detail: Micro-bevelled
• Profile: Tongue & Groove
• Installation: Glue down or floating
• Pack coverage: 1.55 m² per pack
• Boards per pack: 6
• Emissions: VOC rating E1, <5ppm
• Supplier product code: SG136F142