Natural Oak - 9.5mm Duro Plus Hybrid Flooring

Duro Plus Natural Oak is a light to mid greige-taupe oak with cathedral grain, scattered knots and low saturation, the quietest of the three oaks in the range. Fertile Oak is the warmer version of the same look; Easter Oak is paler and cooler still.

Greige is the floor colour that goes with grey joinery without turning cold and with oak furniture without turning yellow, which is why it is the usual pick for open-plan kitchens where both are present. It suits white and soft grey walls, and it is forgiving of dust because it sits in the middle of the tonal range.

Duro Plus is built on an 8mm rigid core with 1.5mm of acoustic underlay already attached, 9.5mm in total, with a 0.5mm wear layer on top. Boards are 1800mm long and 228mm wide.

The surface is an embossed matt with a micro bevel on all four edges, and the boards join with a drop lock click and float over the subfloor. A pack is three boards and 1.2312m2, and weighs 22kg. The floor tested P3 for wet slip to AS 4586:2013 and carries a 25 year residential structural warranty. It is an interior floor, rated for in-slab hydronic heating and not for electric mats.

Specifications

• Type: Rigid core hybrid flooring with pre-attached acoustic underlay
• Construction: 9.5mm total: 8mm rigid core plus 1.5mm attached acoustic underlay
• Wear layer: 0.5mm
• Board size: 1800 x 228 x 9.5mm
• Pack: 3 boards, 1.2312m2, 22kg
• Finish: Embossed matt, micro bevel on 4 sides
• Profile: Drop lock click, floating installation
• Slip resistance: P3, wet pendulum test to AS 4586:2013 Appendix A
• Fire test: CHF 10.4 kW/m2, smoke 57%
• Use: Interior only; no steam mops (warranty condition)
• Underfloor heating: In-slab hydronic only; electric mats not covered by warranty
• Warranty: 25 year limited structural (residential), 5 year limited wear (commercial)