Easi-Plank Herringbone - Grey Stone - 8mm Hybrid Flooring

Grey Stone is the cool grey of the Easi-Plank Herringbone range — a mid tone with clear striation running through each block and enough contrast to keep the pattern legible from standing height. Grey and herringbone is a combination that can go wrong: too pale and the geometry disappears, too dark and it dominates. This sits in the middle, which is why it works.

The blocks are 625mm x 125mm SPC with a 0.7mm commercial-grade wear layer and a 1.0mm acoustic underlay bonded to the back — no separate underlay to buy or lay, which on a herringbone floor is a real saving in both material and labour. Being SPC it is fully waterproof, so it can run from a living room into a kitchen or entry without the restrictions a timber parquetry floor carries.

Preference Floors back it with a 25 year limited lifetime structural warranty, 20 years residential wear and 5 years commercial — the commercial cover is worth noting, because a grey herringbone is as much a shopfront or office floor as a domestic one.

Herringbone takes longer to set out and lay than straight plank, so allow for the extra labour and have it installed properly. Supply and install available across Sydney.

Specifications

• Brand: Preference Floors
• Type: Hybrid flooring (SPC)
• Format: Herringbone parquetry
• Dimensions: 625mm x 125mm x 8mm
• Wear layer: 0.7mm
• Underlay: 1.0mm acoustic underlay attached
• Units per carton: 14 pieces, 1.09m², 15.7kg
• Installation: Click, floating
• Warranty: 25 year limited lifetime structural, 20 year residential wear, 5 year commercial