Red Stone, 7.5mmRed Stone, 7.5mm

Preference Floors

Easi-Plank SPC Hybrid Flooring

Easi-Plank is Preference Floors' SPC hybrid, and it comes in two formats built on the same core. The plank is 7.5mm, milled in two widths: 1520 x 180mm at 6 planks to a carton covering 1.642m2, and 1520 x 228mm at 5 planks covering 1.733m2. The herringbone parquetry is 8mm. Twenty-one colours across both: twelve as plank and nine as herringbone.

Price on request21 colours

Sydney supply and install, or supply only. Questions? Call 0483 939 938.

Choose a thickness

Each thickness is its own range with its own colours.

Easi-Plank 7.5mm7.5mm

12 colours. Tap one to preview it.Click one to preview it.

Preference Floors

Easi-Plank 7.5mm

A stone polymer composite hybrid, 7.5mm including 1.5mm of IXPE underlay, in 1520mm boards at 180mm or 228mm wide. The rigid core lays over existing tiles with little grout telegraphing. It tested P4 for slip and AAAC 5 Star for impact noise.

  • Board size 1520 x 180 x 7.5mm; 1520 x 228 x ...
  • Wear layer 0.5mm
  • Core stone polymer composite core

Price on request

View all 12 colours
Easi-Plank 8mm Herringbone8mm

9 colours. Tap one to preview it.Click one to preview it.

Preference Floors

Easi-Plank 8mm Herringbone

Herringbone parquetry in SPC hybrid, with 625mm x 125mm blocks and a 0.7mm commercial-grade wear layer. A 1.0mm acoustic underlay comes bonded on, which saves a separate layer on a fiddly set-out. Warranty includes 20 years residential wear.

  • Board size 625mm x 125mm x 8mm
  • Wear layer 0.7mm
  • Underlay 1.0mm acoustic underlay attached

Price on request

View all 9 colours

All 21 colours

Tap a colour for more photos and the price calculator.

More about this range

Both use a stone polymer composite core, click together as a floating floor and come with acoustic underlay already attached, so nothing separate goes down first. The plank has a 0.5mm wear layer, 1.5mm of IXPE foam underlay, a Unilin click profile and micro bevel edges with a V4 profile. The herringbone blocks are 625 x 125mm with a 0.7mm wear layer and 1.0mm of underlay bonded on.

Choosing between plank and herringbone is a decision about labour as much as looks. Herringbone has to be set out from the centre of the room and every piece cut to an angle, so it takes longer to lay and costs more to install than a straight plank run. That is why it usually goes in an entry, a hallway or a formal living room rather than through a whole house, and why it is worth raising at quote stage.

Sydney supply and install, supply only, or bring your own installer.

Easi-Plank is one of five hybrid ranges in our Preference Floors range.

Free measure Call