Buck Natural - 14/2mm Prestige Oak Engineered Timber Flooring

Buck Natural is a light warm golden blonde oak with clean, flowing grain and few knots: oak left close to its own colour, with a clear honey warmth. It is the natural-oak reference point of the Prestige Oak 14/2mm range, the board the other warm colours are variations on.

Golden blonde oak suits almost anything, which is why it keeps coming back. It warms a cool room, lifts a dark one, and sits with white, navy, black and every timber tone. If you want a safe whole-house floor in the 14/2mm range, start here.

Prestige Oak 14/2mm is Preference Floors' click engineered oak: a 2mm genuine European Oak wear layer over a 14mm engineered board, joined with a click profile and laid floating. It is real timber on the surface, with the grain and variation no print reproduces, at a lower entry than the 15/4mm range. The trade-off is the wear layer. At 2mm it is a floor you refresh with a clean and a coat rather than one you sand back. Matte polyurethane finish, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

Specifications

• Construction: Engineered timber, 14/2mm, 2mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 2.166m2 per carton (6 planks)
• Profile: Click, floating installation
• Finish: Pre-finished polyurethane, matte
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries
• Also made: 15/4mm board with a 4mm wear layer, tongue and groove or click, see Prestige Oak

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, knots and colour movement. This is the character of the timber, not a fault. We recommend ordering all material for a job at once. Samples are in both Sydney showrooms.