Easter Oak - 9.5mm Duro Plus Hybrid Flooring

Duro Plus Easter Oak is the palest board in the range, a washed warm-grey greige with soft grain and a faint knot here and there. It is lighter and cooler than Natural Oak, and it sits between a Scandinavian whitewash and a pale limed oak.

Pale floors make small and dark rooms feel bigger, and this one does that without going cold, because there is still a little warmth in the grey. It pairs with white and off-white walls, pale timber and soft grey joinery. The cost of a pale floor is that hair, dust and dried drips show sooner, so it suits a household that sweeps often rather than one that cleans hard once a week.

Duro Plus uses an 8mm rigid core with 1.5mm of acoustic underlay bonded on, 9.5mm in total, under a 0.5mm wear layer. The board is 1800mm long and 228mm wide, so a hallway of 5.4m takes exactly three boards end to end.

Finish is embossed matt with a four-side micro bevel, and installation is a drop lock click, floating, with no glue. Packs hold three boards, 1.2312m2, and weigh 22kg. Wet slip tested P3 to AS 4586:2013, and HTT's residential structural warranty is 25 years.

Specifications

• Type: Rigid core hybrid flooring with pre-attached acoustic underlay
• Construction: 9.5mm total: 8mm rigid core plus 1.5mm attached acoustic underlay
• Wear layer: 0.5mm
• Board size: 1800 x 228 x 9.5mm
• Pack: 3 boards, 1.2312m2, 22kg
• Finish: Embossed matt, micro bevel on 4 sides
• Profile: Drop lock click, floating installation
• Slip resistance: P3, wet pendulum test to AS 4586:2013 Appendix A
• Fire test: CHF 10.4 kW/m2, smoke 57%
• Use: Interior only; no steam mops (warranty condition)
• Underfloor heating: In-slab hydronic only; electric mats not covered by warranty
• Warranty: 25 year limited structural (residential), 5 year limited wear (commercial)