Ebony - 15/4mm Prestige Oak Engineered Timber Flooring

Ebony is the darkest board in the Prestige Oak range: a near-black oak with a faint purple-brown undertone and grain still readable through the depth of the stain.

This is the most dramatic floor here, and it is genuinely striking in the right room: open-plan living with large windows, white walls, pale joinery, and furniture with enough presence to hold its own against it. It is not a floor for a small or dim room, where it will close the space in, and it is the board most likely to show dust and pale pet hair. Choose it deliberately rather than by default.

If you want dark without going this far, Dark Brown is a warm chocolate and Espresso, despite the name, is a mid golden brown.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board, deep enough to sand back and recoat two or three times over its life, which no laminate or hybrid can do. UV-cured European polyurethane, superior matte finish, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.