Espresso - 15/4mm Prestige Oak Engineered Timber Flooring

Espresso is worth looking at properly, because the name sets the wrong expectation. It is not a dark coffee brown. It is a warm mid golden-amber oak, closer to honey than to anything espresso-coloured, with rich flowing grain and real warmth.

Taken for what it actually is, it is one of the most likeable boards in the range. Warm mid-tones are the most forgiving floors you can own: dark enough to hide scuffs and light debris, light enough not to shrink a room, and warm enough to stay inviting under evening light where a grey would turn cold. It pairs easily with cream, white, timber furniture, leather and brass.

If you came here wanting a genuinely dark floor, Dark Brown is the warm chocolate and Ebony is the near-black.

Prestige Oak is genuine European Oak with a 4mm wear layer on a 15mm engineered board: real timber, sandable and recoatable two or three times over its life, unlike laminate or hybrid which cannot be refinished at all. UV-cured European polyurethane, superior matte, limited lifetime structural warranty, 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.