Latte - 15/4mm Prestige Oak Engineered Timber Flooring

Latte is a warm mid golden-brown: a tobacco-toned oak with even grain and a settled, unfussy character. It is the middle of the warm range: deeper than Tan, lighter than Dark Brown, and without the olive cast of Chestnut.

Mid browns are the least regretted timber floors. Dark enough to hide scuffs and everyday debris, light enough to keep a room open, and neutral enough to work with whatever furniture arrives over the next decade. In a family home where the floor needs to look after itself, this is the sensible pick in the range.

It also works particularly well with warm whites, cream joinery, rattan and leather: the palette most Australian homes already lean towards.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board: real timber, sandable and recoatable two or three times over its life. Laminate and hybrid cannot be refinished at all, which is the whole case for engineered timber at this level. UV-cured European polyurethane, superior matte, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.