Parana - 15/4mm Prestige Oak Engineered Timber Flooring

Parana is a light warm greige-tan with open knots and visible character: a pale board that has not been sanitised, where the natural marks of the timber are left on show.

That combination is more useful than it sounds. Pale floors brighten a room but usually show every speck; knotted floors hide everything but are usually dark. Parana gives you both: the lightness of a blonde oak with the forgiveness that comes from a surface already full of natural variation. If you want a light timber floor in a hallway, an entry, or a house with children and pets, this is the board in the range that will cope best.

It sits naturally with linen, rattan, pale joinery and greenery, and reads coastal or farmhouse rather than formal.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board, deep enough to sand back and recoat two or three times, which no laminate or hybrid can do. UV-cured European polyurethane, superior matte, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.