Storm - 15/4mm Prestige Oak Engineered Timber Flooring

Storm is a mid grey-brown with a cool, even cast: less variation than Castle Grey, less depth than Iron Grey, and the most restrained of the greyed boards in the Prestige Oak range.

Restraint is its value. Where the heavily varied boards make a statement, Storm behaves the way a good neutral should: it grounds a room without asking for attention, and it works equally against warm and cool furnishings because it sits almost exactly between the two. In an open-plan space, low variation also reads as calm rather than busy across a large floor area.

It is a sensible choice when the rest of the interior is still being decided, or when the floor needs to suit several rooms with different characters.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board: real timber, sandable and recoatable two or three times over its life, unlike laminate or hybrid. UV-cured European polyurethane, superior matte, limited lifetime structural warranty, 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.