Vanilla - 15/4mm Prestige Oak Engineered Timber Flooring

Vanilla is a soft pale greige-beige: a gently warmed neutral with smooth, even grain and low contrast, sitting almost exactly between the warm blondes and the cool greys in the Prestige Oak range.

That middle position is what makes it the safest choice here. It has none of the yellow that puts people off golden oak and none of the coldness that puts them off grey, so it works against warm timber furniture and cool grey upholstery alike. In a house being prepared for sale, or a room where the furnishings are still undecided, it commits you to nothing.

The smooth grain makes it calm across a large open-plan floor. In a busy entry, Parana or Straw will hide wear better.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board: sandable and recoatable two or three times over its life, unlike laminate or hybrid. UV-cured European polyurethane, superior matte, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.