Grey Wash - 15/4mm Prestige Oak Engineered Timber Flooring

Grey Wash is a mid grey-brown with a distinct olive cast and wide variation from board to board: some planks lean pale greige, others a smoky olive-brown, and the grain shows clearly through all of them. It is the most weathered-looking board in the Prestige Oak range, closer to driftwood or aged timber than to a stained modern floor.

That movement does practical work. A floor with this much variation hides marks, dust and everyday traffic far better than a flat, even colour, which makes Grey Wash a sound choice for a hallway or a family living room. It suits plaster, linen, black steel and unglazed ceramics, and it is the natural pick if you want a grey floor that does not read as cold.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board: sandable and recoatable two or three times over its life, unlike laminate or hybrid. UV-cured European polyurethane, superior matte, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.