Pure Natural - 15/4mm Prestige Oak Engineered Timber Flooring

Pure Natural is a light warm blonde-beige oak: clean, soft grain, few knots, and a gentle peach warmth that keeps it from reading as washed out. It is the closest thing in the Prestige Oak range to oak left as it comes off the saw, and it sits a shade paler and quieter than Avola Natural.

Natural blonde oak has outlasted every flooring trend of the last fifty years because it belongs to none of them. It lifts a dark room, warms a cool one, and takes white, cream, navy, black and every timber furniture tone without argument. If you are flooring a whole house and want the one colour you will not tire of, this and Avola Natural are the two to put side by side.

Prestige Oak is genuine European Oak with a 4mm wear layer over a 15mm engineered board: sandable and recoatable two or three times over its life, unlike laminate or hybrid. UV-cured European polyurethane, superior matte, limited lifetime structural warranty and 20 years on the finish. Supply and install available across Sydney.

It is made in two profiles on the same 15/4mm board, tongue and groove and click. Pick the one your installer prefers at checkout. Tongue and groove can be direct stuck or floated; click is a floating install.

Specifications

• Construction: Engineered timber, 15/4mm, 4mm genuine European Oak wear layer
• Board size: 1900mm x 190mm, 1.805m2 per carton (5 planks)
• Profile: Tongue and groove or click, chosen at checkout. Same board, same wear layer. Tongue and groove can be direct stuck or floated; click is floated.
• Finish: Pre-finished, UV-cured European polyurethane, superior matte; light wire brush on selected colours
• Emissions: VOC <E1, below World Health Organisation levels
• Warranty: Limited lifetime structural, 20 years domestic finish
• Suitable for: All internal areas except wet areas, not for bathrooms or laundries

European Oak is a natural material. Variation between boards and between batches is expected and includes mineral streaks, black stain, medullary rays, knots, and slight surface checking and filling. This is the character of the timber, not a fault. We recommend ordering all material for a job at once.