Latte Oak - 15/4mm Quercus Engineered Timber Flooring
We will beat any competitor's price for Latte Oak - 15/4mm Quercus Engineered Timber Flooring flooring.
Price is per m2 and excludes GST. Delivery or pickup must be confirmed with us via Email or Call | Message 0483 939 938 before payment is processed.
Request a Free Measure and Quote
Screen colours vary between devices and our descriptions are a guide only. Slight variation between production batches is normal, so we recommend ordering all material for a job at once.
Quercus Latte Oak is a pale oak with a pink-cream cast and a light limed grain, the same tone as Bonita's Latte Oak but on the thicker 15/4mm board. It is warmer than Rana and a shade deeper than Welsh Cream.
Pale pink-cream oak suits white, blush and warm grey walls, pale timber furniture and soft textiles, and it brightens hallways and small bedrooms. It shows dust and marks sooner than a mid tone, and the pink cast can argue with cool blue-greys, so check it against your joinery colour before ordering.
The board is 15mm thick with a 4mm European oak veneer over a plywood core, so a worn or scratched floor can be sanded back and recoated in years to come rather than replaced. Boards are 1900 x 190mm with a tongue and groove profile for direct stick or floating installation on glued joints.
The coating is a 5 to 8 percent matt and every edge carries a micro bevel. Grade is ABCD, so knots and colour movement between boards are part of the floor, and up to 25 percent of a box may be short boards. A 2.166m2 pack weighs 21.5kg. Wet slip tested P3, and the residential warranty covers the structure for 25 years and the coating for 7.
Specifications
- Type: Engineered European oak, plywood core
- Construction: 15mm total, 4mm oak veneer
- Board size: 1900 x 190 x 15mm
- Pack: 2.166m2, 21.5kg
- Grade: ABCD, up to 25% random short boards per box
- Finish: 5 to 8% matt, micro bevel on 4 sides
- Profile: Tongue and groove; direct stick or floating (glued joints)
- Hardness: Janka 6.6 kN; density 0.75 g/cm3
- Moisture content: 8 to 10%
- Slip resistance: P3, wet pendulum test to AS 4586:2013 Appendix A (43 BPN)
- Use: Interior only, not for bathrooms, toilets or laundries; no steam mops; room temperature kept at or below 26 degrees
- Underfloor heating: Covered only where sub-floor temperature does not exceed 35 degrees
- Warranty: 25 year structural and 7 year finish wear, residential








