Brescia, 14/3mmHTT Flooring
Crosswood Engineered Herringbone Flooring
Crosswood is an engineered herringbone block, 600 x 127mm, with a 3mm sawn veneer over a seven layer plywood core. It glues down with tongue and groove edges and can be sanded back later in its life.
From $99 per m², ex GST9 colours
Sydney supply and install, or supply only. Questions? Call 0483 939 938.
- Thickness
- 14mm total, including a 3mm top veneer
- Board size
- 600 x 127mm
- Wear layer
- 3mm top veneer
- Core
- Seven layer plywood
- Box covers
- 1.8288 sqm, 24 pieces, 16.5kg
- Warranty
- 25 year structural
The 9 colours
Tap a colour for more photos and the price calculator.
-
Walnut$99 per m²Box covers 1.83 m²
-
Spotted Gum$99 per m²Box covers 1.83 m²
-
Raw Timber$99 per m²Box covers 1.83 m²
-
Natural Oak$99 per m²Box covers 1.83 m²
-
Limed Wash$99 per m²Box covers 1.83 m²
-
Latte Oak$99 per m²Box covers 1.83 m²
-
Cuban$99 per m²Box covers 1.83 m²
-
Brescia$99 per m²Box covers 1.83 m²
-
Blackbutt$99 per m²Box covers 1.83 m²
More about this range
Crosswood is HTT Flooring's engineered European oak herringbone, and the block size is what makes it herringbone rather than a plank range: 600mm long by 127mm wide, 14mm thick with a 3mm oak wear veneer. Ten colours.
Herringbone is a different job to lay than a plank floor. Every block is cut and set at an angle, the pattern has to be centred on the room before the first piece goes down, and the perimeter needs cutting to suit. It takes longer and costs more to install than a straight lay, which is worth knowing at quote stage rather than later. What you get for it is a floor that reads as a feature in its own right, which is why it turns up in entries, formal living rooms and hallways more than bedrooms.
The 3mm veneer sits between Bonita at 2mm and Quercus at 4mm, so the floor can be sanded and recoated over the years. Boards are graded ABCD with a 5 to 8 percent matte finish, micro bevel edges and a Tongue and Groove profile. A pack holds 24 pieces covering 1.8288 square metres at 16.5kg.
Order all the material for a job at once and allow for acclimatisation in the room before cutting starts. Sydney supply and install, supply only, or bring your own installer.