Wolf Grey, 8mmWolf Grey, 8mm

Preference Floors

Oakleaf HD Plus Laminate Flooring

Oakleaf HD Plus is Preference Floors' high definition laminate, and Adore stocks it in both thicknesses Preference make. The 12mm board is 2200 x 196mm with a carton covering 1.725m2. The 8mm board is 1215 x 195mm, eight planks to a carton for 1.8954m2. Same decor on both, same print, same coating; what changes is the length of the plank under it and the price.

Price on request22 colours

Sydney supply and install, or supply only. Questions? Call 0483 939 938.

Choose a thickness

Each thickness is its own range with its own colours.

Oakleaf HD Plus 8mm8mm

7 colours. Tap one to preview it.Click one to preview it.

Preference Floors

Oakleaf HD Plus 8mm

The 8mm build of HD Plus on 1215mm x 195mm planks, with the same print, AC4 rating and super matte coating as the 12mm. Its 48 hour water-resistant system combines a T Seam tight lock click, treated bevel edges and a tested core. It suits bedrooms, units and rental refreshes. Warranty is 25 years structural.

  • Board size 1215mm x 195mm x 8mm
  • Surface rating AC4
  • Water 48 hour water-resistant system

Price on request

View all 7 colours
Oakleaf HD Plus 12mm12mm

15 colours. Tap one to preview it.Click one to preview it.

Preference Floors

Oakleaf HD Plus 12mm

A laminate on 2200mm x 196mm boards, with a high definition print across 30 pattern repeats. It is AC4 rated with a 48 hour water-resistant core and a moisture-protection treated V4 bevel. It is P3 slip rated and GOLD Greenguard Certified. Warranty is 25 years structural and 20 years on the finish.

  • Board size 2200mm x 196mm x 12mm
  • Surface rating AC4
  • Water 48 hour water-resistant core

Price on request

View all 15 colours

All 22 colours

Tap a colour for more photos and the price calculator.

More about this range

Fifteen colours at 12mm. Blackbutt and Spotted Gum cover the Australian species, with Hickory alongside them for a North American look. The pale and neutral end runs Alpine Mist, Arctic Fox, Bellmore Oak, Delta Sand, Natural, Sierra Oak and Windsor. Bedrock, Clove and Hampton Oak hold the mid to darker tones, and the greys are Silk Grey and Wolf Grey.

Seven of those are also stocked at 8mm: Alpine Mist, Bedrock, Blackbutt, Delta Sand, Natural, Spotted Gum and Wolf Grey. The 8mm is the board for a unit, a rental refresh or a bedroom where budget leads. The 2.2 metre 12mm plank earns its premium across a large open-plan floor, where the shorter board would put noticeably more end joins in front of you.

The specification is what separates it from ordinary laminate. It is AC4 rated with a 48 hour water resistant core and a moisture protection treated V4 micro bevel, so a spill that would swell an untreated joint has time to be wiped up. Seam swell and seepage testing runs past 80 hours against EN 13329, ISO 24336 and NALFA. Slip is rated P3 under AS 4586:2013 Appendix A. Fire testing returns a CHF value of 4.4kW/m2 with a smoke value of 12% minimum. The surface is a high definition digital print under a super matte coating, which keeps glare down under downlights, and it installs floating with a Valinge click profile and no adhesive.

It is GOLD Greenguard Certified for low chemical emissions, which is worth knowing if the floor is going into a bedroom or a nursery. Preference back it with a 25 year limited structural warranty and 20 years on the finish.

One limitation to be clear about: laminate is not a wet area floor, so check Preference's installation requirements before laying it in a bathroom, laundry or powder room.

Installation is Sydney only. We can supply and install, supply only if you are laying the floor yourself, or supply and stay on hand while your own installer does the work. Book a free measure and quote, or see the boards in person at one of our Sydney showrooms.

Comparing laminates? AquaStop is the water resistant option from the same supplier, and every range we stock from them is on our Preference Floors page.

Free measure Call