Flooring Sydney
Adore Rugs & Flooring supplies and installs flooring across Sydney. Every job starts the same way: we come out, measure the space, look at what is under the existing floor, and quote on what the job actually needs rather than a rate per square metre with the hard parts left off. The measure and quote are free.
Who lays the floor
The same installers do our work week in and week out. They are not a rotating pool of whoever is available. Our lead flooring installer has laid every product we stock, including the ones most crews would rather not quote on: herringbone, glue-down engineered timber, and stairs. Carpet has its own dedicated installer, because carpet is a different trade with different tools and a different unit of measurement.
That matters more than it sounds. Most flooring complaints are not about the boards. They are about a subfloor nobody checked, a stair nosing that does not sit flat, or a transition into a tiled hallway that ends up a centimetre proud.
What actually happens on an install
1. Measure and subfloor assessment
We measure the rooms and check the substrate. On a concrete slab that means checking for moisture and for level. On timber or particleboard it means checking for movement and for squeaks that will still be there afterwards. A floor laid over a bad substrate will fail no matter what you paid for the boards.
2. Preparation
This is where the variation in a quote comes from. Old carpet and underlay have to come up. Tack strips have to come out. Where underlay has perished and bonded itself to the slab it has to be scraped off, which is slow, unglamorous work that many quotes quietly omit. Where the slab is out of level we self-level it. Where a new floor has to finish flush with existing tiles, we build the substrate up to meet them.
3. Laying
Floating floors go down over acoustic underlay with expansion gaps at every wall and fixed object. Glue-down engineered goes down in adhesive with a trowel notch matched to the board. Herringbone is set out from a centre line so the pattern lands square to the room rather than square to a wall that is not straight.
4. Trims and finishing
Scotia or new skirting to cover the expansion gap, door bars at transitions, stair nosings where the floor runs up a staircase. Old floor coverings and offcuts go with us.
A recent Sydney job
A customer wanted carpet replaced with hybrid plank through the downstairs of their home. Two of the downstairs rooms sat lower than the tiled corridor, so the subfloor in both had to be raised to finish flush rather than leaving a lip at every doorway. The old underlay had melted onto the slab and had to be scraped back before anything could be laid. The staircase was clad in the same plank so the timber runs continuously from the ground floor up. All of it was done around the customer's furniture rather than emptying the house.
Product used was EasiPlank Natural Blackbutt. The customer left us a five star review afterwards, which is the only performance measure that counts on a job like that one.
What we install
- Hybrid floating, from 6.5mm up to 10mm, including herringbone
- Laminate floating, 8mm and 12mm, including water-resistant ranges for kitchens and laundries
- Engineered timber, floating or glue-down, including herringbone and chevron
- Vinyl plank and vinyl tile, including looselay and glue-down
- Broadloom carpet, stretched over underlay or direct stick
- Carpet tiles, for offices, gyms and rental properties
We hold ranges from Belgotex, Godfrey Hirst, Preference Floors, HTT Flooring, Terra Mater, Bass Timber, Airlay, Eco Flooring Systems and StoneFloor, so a quote is rarely limited to one brand's answer to your problem.
Where we work
The showroom is at 111 Station Road, Auburn. That is a short run to Sydney Olympic Park and a straight line down Parramatta Road into the city.
We install right through the inner west and across the harbour: Concord, Five Dock, Abbotsford, Drummoyne, Haberfield, Strathfield, Burwood, Balmain, Rozelle, Leichhardt, Hunters Hill, Gladesville, Lane Cove, Mosman and Neutral Bay. Rhodes, Wentworth Point, Newington and Sydney Olympic Park are ten minutes from the showroom door. East of the city we work through Paddington, Surry Hills, Randwick and Kensington.
Our own end of town is covered as well: Auburn, Lidcombe, Granville, Parramatta, Merrylands, Bankstown and Fairfield.
We travel further for larger jobs and for builders we work with regularly. If you are outside that spread, call and ask.
Questions we get asked
How long does an install take?
A single room is usually a day. A standard three bedroom house in hybrid or laminate is two to three days. Add time for subfloor preparation, stairs, or herringbone, all of which are slower than a straight lay.
Do I have to move my furniture?
Not necessarily. We work around furniture regularly, moving it room by room. It adds time, so tell us at the measure and it goes in the quote rather than becoming a surprise on the day.
Do you remove the old floor?
Yes. Carpet uplift, underlay removal and disposal are all things we do and all things we quote for separately, because the effort varies enormously between a carpet that lifts cleanly and one that has bonded to the slab.
My floor is uneven. Is that a problem?
It is a problem if it is ignored. Floating floors need a substrate within tolerance or the boards will flex, the joints will open and the floor will click underfoot. We self-level where it is needed and price that into the quote.
Can you match a new floor to existing tiles?
Yes, by building the substrate up so the finished heights meet. It is the most common request we get in homes where only part of the ground floor is being redone.
Book a measure
Call 02 9166 3980, request a free measure online, or come into the Auburn showroom with your room dimensions and a photo of what is down now. Bring a photo of the room in daylight if you want help matching a colour. The measure and quote cost nothing and come with no obligation to book the work.
Showing 638 products
AVAILABILITY: In stock (1000 items)
Ivory is not the near-white the name suggests. It is a light warm greige-tan with visible knots and honest grain movement: a soft, natural pale board rather than a bleached one. That is worth saying plainly, because customers reading "Ivory"...
AVAILABILITY: In stock (1000 items)
Classic Oak is exactly what it says: a light golden-tan oak with clean, even grain and no stain pulling it grey or red. It is the most conventional colour in the Preference Floors Oakleaf range and, for a lot of...
AVAILABILITY: In stock (1000 items)
Blackbutt in the Preference Floors Oakleaf range is a rich golden-amber, noticeably more saturated than the species actually lays. Real Australian blackbutt is a paler gold with a soft olive cast; this is a warmer, more golden interpretation of it....
AVAILABILITY: In stock (1000 items)
Aspen is the neutral of the Preference Floors Oakleaf range: a light warm greige-tan with soft grain movement and moderate variation from plank to plank. It sits almost exactly between the warm golden colours and the cool greys here, which...
AVAILABILITY: In stock (1000 items)
White Sands is a light greige oak with a wire-brushed surface, pale and cool-leaning, with the brushing raising the grain so the floor has texture you can feel as well as see. The brushed finish is what separates it from...
AVAILABILITY: In stock (1000 items)
Vanilla is a soft pale greige-beige: a gently warmed neutral with smooth, even grain and low contrast, sitting almost exactly between the warm blondes and the cool greys in the Prestige Oak range. That middle position is what makes it...
AVAILABILITY: In stock (1000 items)
Tan is a light-to-mid golden oak with scattered knots, warmer and a shade deeper than Straw, with the same natural character but a little more colour in it. It sits in the most useful part of the range. Light enough...
AVAILABILITY: In stock (1000 items)
Straw is a pale natural oak with open knots, light, warm and unstained, closer to raw timber than to anything finished, with the grain and natural marks left clearly visible. It is the most honest-looking board in the Prestige Oak...
AVAILABILITY: In stock (1000 items)
Storm is a mid grey-brown with a cool, even cast: less variation than Castle Grey, less depth than Iron Grey, and the most restrained of the greyed boards in the Prestige Oak range. Restraint is its value. Where the heavily...
AVAILABILITY: In stock (1000 items)
Parana is a light warm greige-tan with open knots and visible character: a pale board that has not been sanitised, where the natural marks of the timber are left on show. That combination is more useful than it sounds. Pale...
AVAILABILITY: In stock (1000 items)
Marble is the palest board in the Prestige Oak range: a very light white-grey with the faintest warm cast and grain so soft it barely registers from standing height. A floor this pale is a design decision rather than a...
AVAILABILITY: In stock (1000 items)
Limewash is a warm golden oak with white pulled through the grain: the traditional limed finish, where pale pigment sits in the open pores and leaves the surface reading both warm and softened at once. Liming is an old technique...
AVAILABILITY: In stock (1000 items)
Latte is a warm mid golden-brown: a tobacco-toned oak with even grain and a settled, unfussy character. It is the middle of the warm range: deeper than Tan, lighter than Dark Brown, and without the olive cast of Chestnut. Mid...
AVAILABILITY: In stock (1000 items)
Iron Grey is a mid-dark smoky grey-brown with strong plank-to-plank variation: some boards reading almost charcoal, others distinctly brown, with a wire-brushed surface that gives the floor texture as well as colour. It is the darkest grey in the Prestige...
AVAILABILITY: In stock (1000 items)
Heritage Grey is the most characterful board in the Prestige Oak range, and the name undersells it badly. It is not a grey floor. It is a deliberately mixed board where dark chocolate, golden honey and mid-brown planks sit side...
AVAILABILITY: In stock (1000 items)
Grey Mist is a pale, soft grey-beige: a gently greyed oak with low contrast and quiet grain, the lightest of the true greys in the Prestige Oak range. Pale greys are the easiest timber floors to furnish around, because almost...
AVAILABILITY: In stock (1000 items)
Espresso is worth looking at properly, because the name sets the wrong expectation. It is not a dark coffee brown. It is a warm mid golden-amber oak, closer to honey than to anything espresso-coloured, with rich flowing grain and real...
AVAILABILITY: In stock (1000 items)
Ebony is the darkest board in the Prestige Oak range: a near-black oak with a faint purple-brown undertone and grain still readable through the depth of the stain. This is the most dramatic floor here, and it is genuinely striking...
AVAILABILITY: In stock (1000 items)
Dark Brown is a deep chocolate oak: rich and warm, with strong grain running visibly through the depth of colour rather than disappearing into it. Dark timber floors are a commitment worth being clear about. In a room with generous...
AVAILABILITY: In stock (1000 items)
Castle Grey is a mid grey-brown with pronounced variation from board to board: some planks lean brown, others distinctly grey, and the wire-brushed surface catches light differently across the floor. That variation is the point. A greyed timber floor with...
AVAILABILITY: In stock (1000 items)
Avola Natural is European Oak left to look like itself: a bright golden honey tone with clean flowing grain and no stain pushing it warmer or cooler. It is the most natural-looking board in the Prestige Oak range and the...
AVAILABILITY: In stock (1000 items)
Spotted Gum in the 7mm range is a mid honey-brown with the wavy fiddleback figure and black gum vein marks that make the species recognisable, and a clear spread between honey and deeper brown planks. Of the six 7mm colours,...
AVAILABILITY: In stock (1000 items)
Siena is the warmest board in the 7mm range, a mid warm terracotta-tan with an apricot cast and smooth, even grain. The name is apt: it sits close to the burnt-sienna end of the timber palette, warmer and redder than...
AVAILABILITY: In stock (1000 items)
Paris is a pale cool grey-white oak with soft grain, the smoother of the two whitewashed boards in the 7mm range. Barcelona has heavier white striation and reads a shade colder; Paris is quieter and a touch warmer, closer to...





























