Flooring Sydney
Adore Rugs & Flooring supplies and installs flooring across Sydney. Every job starts the same way: we come out, measure the space, look at what is under the existing floor, and quote on what the job actually needs rather than a rate per square metre with the hard parts left off. The measure and quote are free.
Who lays the floor
The same installers do our work week in and week out. They are not a rotating pool of whoever is available. Our lead flooring installer has laid every product we stock, including the ones most crews would rather not quote on: herringbone, glue-down engineered timber, and stairs. Carpet has its own dedicated installer, because carpet is a different trade with different tools and a different unit of measurement.
That matters more than it sounds. Most flooring complaints are not about the boards. They are about a subfloor nobody checked, a stair nosing that does not sit flat, or a transition into a tiled hallway that ends up a centimetre proud.
What actually happens on an install
1. Measure and subfloor assessment
We measure the rooms and check the substrate. On a concrete slab that means checking for moisture and for level. On timber or particleboard it means checking for movement and for squeaks that will still be there afterwards. A floor laid over a bad substrate will fail no matter what you paid for the boards.
2. Preparation
This is where the variation in a quote comes from. Old carpet and underlay have to come up. Tack strips have to come out. Where underlay has perished and bonded itself to the slab it has to be scraped off, which is slow, unglamorous work that many quotes quietly omit. Where the slab is out of level we self-level it. Where a new floor has to finish flush with existing tiles, we build the substrate up to meet them.
3. Laying
Floating floors go down over acoustic underlay with expansion gaps at every wall and fixed object. Glue-down engineered goes down in adhesive with a trowel notch matched to the board. Herringbone is set out from a centre line so the pattern lands square to the room rather than square to a wall that is not straight.
4. Trims and finishing
Scotia or new skirting to cover the expansion gap, door bars at transitions, stair nosings where the floor runs up a staircase. Old floor coverings and offcuts go with us.
A recent Sydney job
A customer wanted carpet replaced with hybrid plank through the downstairs of their home. Two of the downstairs rooms sat lower than the tiled corridor, so the subfloor in both had to be raised to finish flush rather than leaving a lip at every doorway. The old underlay had melted onto the slab and had to be scraped back before anything could be laid. The staircase was clad in the same plank so the timber runs continuously from the ground floor up. All of it was done around the customer's furniture rather than emptying the house.
Product used was EasiPlank Natural Blackbutt. The customer left us a five star review afterwards, which is the only performance measure that counts on a job like that one.
What we install
- Hybrid floating, from 6.5mm up to 10mm, including herringbone
- Laminate floating, 8mm and 12mm, including water-resistant ranges for kitchens and laundries
- Engineered timber, floating or glue-down, including herringbone and chevron
- Vinyl plank and vinyl tile, including looselay and glue-down
- Broadloom carpet, stretched over underlay or direct stick
- Carpet tiles, for offices, gyms and rental properties
We hold ranges from Belgotex, Godfrey Hirst, Preference Floors, HTT Flooring, Terra Mater, Bass Timber, Airlay, Eco Flooring Systems and StoneFloor, so a quote is rarely limited to one brand's answer to your problem.
Where we work
The showroom is at 111 Station Road, Auburn. That is a short run to Sydney Olympic Park and a straight line down Parramatta Road into the city.
We install right through the inner west and across the harbour: Concord, Five Dock, Abbotsford, Drummoyne, Haberfield, Strathfield, Burwood, Balmain, Rozelle, Leichhardt, Hunters Hill, Gladesville, Lane Cove, Mosman and Neutral Bay. Rhodes, Wentworth Point, Newington and Sydney Olympic Park are ten minutes from the showroom door. East of the city we work through Paddington, Surry Hills, Randwick and Kensington.
Our own end of town is covered as well: Auburn, Lidcombe, Granville, Parramatta, Merrylands, Bankstown and Fairfield.
We travel further for larger jobs and for builders we work with regularly. If you are outside that spread, call and ask.
Questions we get asked
How long does an install take?
A single room is usually a day. A standard three bedroom house in hybrid or laminate is two to three days. Add time for subfloor preparation, stairs, or herringbone, all of which are slower than a straight lay.
Do I have to move my furniture?
Not necessarily. We work around furniture regularly, moving it room by room. It adds time, so tell us at the measure and it goes in the quote rather than becoming a surprise on the day.
Do you remove the old floor?
Yes. Carpet uplift, underlay removal and disposal are all things we do and all things we quote for separately, because the effort varies enormously between a carpet that lifts cleanly and one that has bonded to the slab.
My floor is uneven. Is that a problem?
It is a problem if it is ignored. Floating floors need a substrate within tolerance or the boards will flex, the joints will open and the floor will click underfoot. We self-level where it is needed and price that into the quote.
Can you match a new floor to existing tiles?
Yes, by building the substrate up so the finished heights meet. It is the most common request we get in homes where only part of the ground floor is being redone.
Book a measure
Call 02 9166 3980, request a free measure online, or come into the Auburn showroom with your room dimensions and a photo of what is down now. Bring a photo of the room in daylight if you want help matching a colour. The measure and quote cost nothing and come with no obligation to book the work.
Showing 638 products
AVAILABILITY: In stock (1000 items)
Quercus Candly is a near-black oak, a deep charcoal-brown with the grain just visible as a slightly lighter figure, and the darkest board HTT makes in engineered timber. It is darker and browner than Bonita Brescia.A black floor is a...
AVAILABILITY: In stock (1000 items)
Quercus Arizonica is a light warm oak with a pink-blonde cast, soft grain and a few small knots, close to the colour of freshly sanded European oak under a clear coat. It is warmer than Rana and Welsh Cream and...
AVAILABILITY: In stock (1000 items)
Quercus Aliena is a mid grey-brown oak, a smoky taupe with the grain clearly visible and moderate variation from board to board. It is neither a warm brown nor a true grey, which is what lets it sit between grey...
AVAILABILITY: In stock (1000 items)
Duro Plus Spotted Gum is a mid to dark brown with the wavy fiddleback figure the species is known for, black gum vein and a wide spread from honey planks to deep chocolate ones. It looks like the timber, which...
AVAILABILITY: In stock (1000 items)
Ignore the name. Duro Plus Navy Grey is a mid cool grey with strong white limed cathedral grain and there is no blue in it at all; it is a limed grey oak, and the boldest grain pattern in the...
AVAILABILITY: In stock (1000 items)
Duro Plus Natural Oak is a light to mid greige-taupe oak with cathedral grain, scattered knots and low saturation, the quietest of the three oaks in the range. Fertile Oak is the warmer version of the same look; Easter Oak...
AVAILABILITY: In stock (1000 items)
Duro Plus Queensland Spotted Gum is a mid to dark red-brown with fiddleback figure and a rust cast, noticeably redder than the plain Spotted Gum in the same range. Where that board runs honey to chocolate, this one runs terracotta...
AVAILABILITY: In stock (1000 items)
Duro Plus Fertile Oak is a mid warm sandy tan with clear oak grain, a few small knots and dark flecks, and moderate variation from plank to plank. It is the warmest of the three oak decors in the range:...
AVAILABILITY: In stock (1000 items)
Duro Plus Easter Oak is the palest board in the range, a washed warm-grey greige with soft grain and a faint knot here and there. It is lighter and cooler than Natural Oak, and it sits between a Scandinavian whitewash...
AVAILABILITY: In stock (1000 items)
Duro Plus Brushbox is a mid to dark red-brown with smooth, fine grain and little figure, the plainest of the dark boards in the range. Real brush box is a pinkish brown; this board is deeper and redder than that,...
AVAILABILITY: In stock (1000 items)
Duro Plus Blackbutt is a light to mid warm golden tan, smooth, with fine straight grain and the odd pale sapwood streak and small dark fleck. Of the hybrid blackbutts on this site it is one of the closer matches...
AVAILABILITY: In stock (1000 items)
Guardian Estate Grey is a pale to mid grey with pronounced silvery limed striation running the length of the board and one noticeably paler plank in the mix. It is lighter and more washed than Grey Oak and cooler than...
AVAILABILITY: In stock (1000 items)
Guardian Cottage Brown is a mid mushroom-taupe rather than the warm brown the name suggests. There is brown in the base, but it is greyed back, and the result is one of the most neutral boards in the range: even...
AVAILABILITY: In stock (1000 items)
Guardian Homestead Chestnut is the warmest and most rustic board in the range, a mid-dark olive-brown with strong grain, open knots and a golden plank coming through here and there. It leans more olive than the red-brown the name suggests,...
AVAILABILITY: In stock (1000 items)
Concrete Beige is the only non-timber decor in the Guardian range, and it is worth saying plainly that it reads as pale grey concrete rather than as a beige. The warmth is there but it is faint. The surface is...
AVAILABILITY: In stock (1000 items)
Guardian White Oak is the palest board in the range, a near off-white warm-neutral greige with the finest grain and the lowest contrast of the fourteen. It is lighter than Chester Oak and warmer than Estate Grey, and it is...
AVAILABILITY: In stock (1000 items)
The name will send you the wrong way, so here is what Dark Oak actually is: a mid-dark cool grey with strong silvery limed grain running through it. There is no brown in it worth speaking of, and it is...
AVAILABILITY: In stock (1000 items)
Guardian Dexter Oak is a mid grey-brown with heavy open grain, visible knots and the sharpest plank-to-plank variation in the range after Spotted Gum. Some boards come through noticeably paler and some clearly darker, and that spread is the point...
AVAILABILITY: In stock (1000 items)
Guardian Grey Oak is the clearest true grey in the range: a mid cool grey with strong striated grain and enough contrast between boards to keep it from looking flat. Estate Grey is the paler, more silvery alternative and Dark...
AVAILABILITY: In stock (1000 items)
Guardian Natural Oak Grey is the grey version of Natural Oak and the name is accurate: a light to mid grey with a brown undertone still running underneath it, and the same knots and open grain. It is cooler than...
AVAILABILITY: In stock (1000 items)
Guardian Natural Oak is the board with the most character in the mid range: a mid greige-brown carrying knots, open grain and a visible shift in tone between planks. Set it beside Chester Oak and this one is clearly deeper...
AVAILABILITY: In stock (1000 items)
Guardian Chester Oak is a light warm greige-tan with soft open grain and mild variation between boards. It is the gentlest of the pale decors here, warmer than Natural Oak Grey and less washed out than White Oak, which makes...
AVAILABILITY: In stock (1000 items)
Guardian Fertile Oak is the warmest of the three golden boards, a mid caramel-tan that sits a step deeper and slightly redder than Blackbutt. The grain is fine and the surface is smooth, so the warmth comes from the colour...
AVAILABILITY: In stock (1000 items)
Read this one from the swatch rather than the name. Guardian Spotted Gum is a greyed taupe-brown with pale cream boards mixed through it, and the plank-to-plank variation is the widest in the range. Real spotted gum lays honey, amber...





























